Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
NOTICE
1. Do not pull the window sash down so tightly
that the movement of frame curtain is
restricted. Attach the cabinet to the window
stool by driving the screws (Type B) through
the cabinet into window stool.
2. The cabinet should be installed with a very
slight tilt downward toward the outside.
3.
Pull each frame curtain fully to each window sash
track, and pull the bottom window sash down behind
the t op retainer bar until it meets.
4.
Attach each frame curtain the window sash by
using screws (Type C).
5. Slide the unit into the cabinet.
For security purpose, reinstall screws
（removed from cabinet） at cabinet's sides.
See page 12.
Cut the foam-strip （Not adhesive backed）
6.
to the proper length and insert between the upper
window sash and the lower window sash.
7.
Attach the window locking bracket with a screw
(Type C).
14
（Not adhesive backed）
Window locking
bracket
Publicidad
