Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Step-by-step installation
STEP 1 Select a location
Location requirements:
• A solid, level surface without carpeting or flooring that may obstruct ventilation
• No direct sunlight
• Adequate room for ventilation and wiring
• Ambient temperature always higher than the freezing point (32 °F / 0 °C)
• Away from heat sources
STEP 2 Remove the shipping bolts
WARNING
• The shipping bolts secure the tub during product transportation and reduce the chance
of suspension damage. Remove the shipping bolts before using the product and only
reassemble them back in case you need to move the product.
• Packaging materials can be dangerous to children. Dispose all packaging material
(plastic bags, polystyrene, etc.) out of children's reach.
24
English
Untitled-11 24
Untitled-11 24
Unpack the product package and remove
all shipping bolts.
1. Loosen all shipping bolts on the rear of
the machine using the spanner.
NOTE
Use the enclosed end of the supplied
wrench to remove the shipping bolts.
2. Fill the holes with the supplied plastic
bolt caps.
Keep the shipping bolts for future use.
2020-04-02
2020-04-02
4:58:37
4:58:37
Publicidad
