Beamz BS1200 Manual Del Usuario página 28

001-512
4 / 11 / 13 / 34
Channel 4 mode
Channel 11 mode
Channel 13 mode
Channel 34 mode
Auto 00 Speed <000> to <255>
Color<000> to <017>
Auto 01
Auto 02
....
Auto 36
Dimmer 000-255
Strobe 000-255
Yes
No
Dimmer 000-255
Strobe 000-255
Blue 000-255
Green 000-255
Red 000-255
on
60s
120s
300s
Temp 1 xxºC
Temp 2 xxºC
Test1
Test2
Version VV03.11
Reset Yes
No
<Curve 0>
<Curve 1>
<Curve 2>
<Curve 3>
<Speed 0>
<Speed 1>
......
<Speed 7>
DMX address setting
Select DMX channel mode
Checking DMX values for each DMX Channel
Select auto program and adjust auto run speed
Adjust dimmer level and switch on strobe at different speed for auto
run
Select master or slave mode
Switch off master / slave function
Manual setting
Display background light always stays on
Display background light turns off after 60s
Display background light turns off after 120s
Display background light turns off after 300s
Display current temperature on LED panel
Display current temperature on
Test mode without flash
Test mode with flash
Display current version
Restore factory settings
Select dimming curve
Select fade time