Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
STEP 5 Align the fridge doors
A
30
English
Untitled-1 30
B
D
C
C
D
E
F
G
C
• Before aligning the fridge doors, make
sure the refrigerator is level. Refer to
the "Leveling the refrigerator" section
for detailed instruction.
• You can use the adjustment parts (*) at
the bottom of both fridge doors to raise
or lower the door.
1. Fully open the freezer drawer (A), and
then find the middle hinge (B).
2. Insert the Phillips screwdriver (C) into
the shaft (D) of the middle hinge.
3. Turn the Phillips screwdriver (C)
clockwise or counterclockwise to raise
or lower the door.
4. Use the Pliers (D) to insert the provided
snap ring (E) in the gap between the
hinge-grommet (F) and the middle hinge
(G). The number of snap rings depends
on the gap.
NOTE
Two 0.04" snap rings are provided with the
product.
2022-12-06
2:19:43
Publicidad
