Vaporfi VEX 150 TC Manual página 5

TCR (M1, M2, M3):
The VEX 150w TC mod offers the TCR function, which enables users to customize
their temperature control atomizers (Ni, Ti, SS). To enter TCR mode, press the power
button three times, once you have entered the mode menu, press the + button until
you see the TCR mode. While the mode is still flashing you can press the – button to
scroll through the set memories (M1, M2, M3), once entered only the memory setting
will flash. Now press the + button to choose a memory and follow that by pressing the
power button to confirm.
TCR SETUP:
With the device turned off, hold the power button and + button for five seconds.
Once you have entered the TCR menu, press the + or - button to choose a memory.
You will then press the power button to enter your parameter setting. Press the + or -
button to set the parameter for your atomizer. Then hold the fire button to confirm.
EXTRA FEATURES:
1. NEW COIL/SAME COIL PROMPT
When replacing your atomizer, especially from a nickel atomizer to a temperature
controlled atomizer (Ni, Ti, SS 316), you will be required to reset the resistance of that
5
www.vaporfi.com