Publicidad
Idiomas disponibles
Idiomas disponibles
atomizer. This helps the device recognize that the new atomizer is to be used at room
temperature, which ensures that you will not experience a burnt hit, if properly
primed. When prompted press the + button to indicate that the replacement atomizer
is new. If you are using the same atomizer and are prompted, press the – button
indicating that the atomizer is the same.
2. LOCK/UNLOCK IN TEMPERATURE MODE
When using an atomizer in temperature control, to ensure that your atomizer is read
at the correct base resistance, you have the ability to lock your resistance. Press the
power button three times to enter the menu. Then press the – button to enter the
second row of your display, you will notice the resistance display is now blinking. Now,
press the + button to lock the resistance.
Note: It is important to unlock your atomizer's resistance before replacing the
atomizer. This will ensure that the new atomizer is installed at room temperature.
3. KEY LOCK
While the device is on, hold the + and – buttons to enter key lock mode. While in
this mode, you will be unable to change the wattage/temperature, but will still be
able to fire.
6
www.vaporfi.com
Publicidad
