Corsair XENEON 32QHD165 Manual De Instrucciones página 5

ASSEMBLY
Before you begin, you will need a Phillips head screwdriver.
1. Remove top layer of foam (see image 1) that includes accessories and stand to expose
rear of panel.
2. Carefully open up the foam bag covering the panel to expose the mounting area. Do not
remove the panel from the bag
3. Align the monitor post with the mounting slots on the back of the panel (see image 2). Slide
the upper hooks into the mounting slots on the rear of the panel. Using a Phillips screwdriver,
secure the post to the panel with the 4 screws.
4. Attach the stand base to the monitor post (see image 3) and tighten the captive thumbscrew
into the bottom of the post (see image 4).
5. Slowly remove the monitor from the packaging and sit upright on your desk. Do not touch
the front of the panel while lifting the monitor.
1
3
2
4
4