Publicidad
Idiomas disponibles
Idiomas disponibles
11
11A
11B
Insert Side Spray Hose (11A) through Hose Guide (11B).
12 DIVERTER INSTALLATION
12
12B
12D
12C
12A
Push Diverter Tee (12A) all the way up until completely seated onto Mounting
Shank (12B). Slide Clip (12C) into Diverter Holes (12D), to secure unit.
When installing without side spray, a One Way Connector (12E) 970-037 must
be used and is to be ordered separately.
13 HOSE ATTACHMENTS
12E
ENGLISH
13
13D
13C
13B
13A
13D
13C
From underneath sink, push Outlet Hose Fitting (13A), firmly onto the Diverter
Receiving Tube (13B) until unable to push any further. Connect Spray Hose
Fitting (13C) into Diverter Outlet Collet (13D) until unable to push any further.
Pull on connection Fittings (13A & 13C). If the Fittings (13A & 13C) and the Inner
Collets (13E) separate slightly but do not pull off, the connections are secure.
14 SOAP DISPENSER INSTALLATION
14
Pour in liquid soap (not included) into Guide Orifice (14A). Insert Pump
Mechanism (14B) into Soap Dispenser Guide (14C). Install Dispenser Head
(14D) by pushing firmly onto Pump Mechanism (14B).
15 WATER SUPPLY CONNECTIONS
4
13B
13A
13E
13E
14D
14B
14A
14C
Publicidad
