BTI PROFILINE -DS 180 E Instrucciones De Servicio página 23

Operating instructions for the Delta Sander.
Overview.
1 Switch
For switching ON/OFF.
2 Speed controller
Oscillation frequency selector with
electronic speed regulator.
1 = lowest oscillation frequency.
8 = highest oscillation frequency.
3 Tools
Mount tools with the respective tight-
ening screw.
(a) Sanding plate.
(b) Spatula.
(c) Saw blades.
4 Sanding sheet
Mount the sanding sheet with the
quick Velcro fixation.
The accessories described or illustrated in
these operating instructions are not nec-
essarily included in the delivery of your
power tool.
For your safety.
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions con-
tained therein are strictly followed.
Intended use.
This power tool is intended for dry-sand-
ing small areas and for sawing and scrap-
ing – with accessories, also for polishing,
rasping, cutting and separating.
Safety instructions.
!
Risk of injury
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
Do not treat any materials that produce
any particles that are detrimental to health
(e. g. asbestos).
!
Damage to property/material
Mains voltage must correspond with the
voltage specifications on the power tool.
Only use original accessories.
Personal protective equipment.
When using this power tool wear the fol-
lowing protective items:
Protective glasses, ear protection, breath-
ing mask.
English - 1