Publicidad
Idiomas disponibles
Idiomas disponibles
READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION. IF UNSURE
CONSULT A QUALIFIED ELECTRICIAN.
THANK YOU FOR YOUR PURCHASE
Thank you for purchasing this quality product. To ensure correct function and safety, please read
and save all instructions before using the product
SAFETY RULES
1.
To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel
before you begin the fan installation or before servicing the fan or installing accessories.
2.
Read all instructions and safety information carefully before installing your fan and save
these instructions.
EN
3.
Make sure all electrical connections comply with local codes or ordinances and the National
Electrical Code. If you are unfamiliar with electric wiring, please use a qualified and licensed
electrician.
4.
Make sure you have a location selected for your fan that allow clear space for the blades to
rotate, and at least seven (7) feet of clearance between the floor and the fan blade tips. The
fan should be mounted at least thirty (30) inches from walls or other upright structures.
5.
WARNING: The outlet box and ceiling support joist used must be securely mounted, and
capable of supporting at least 100 pounds. To reduce the risk of fire, electric shock or
personal injury, mount to the outlet box marked acceptable for fan supported and use
mounting screws provided with the outlet box. The box must be supported directly by the
building structure.
6.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box
marked "acceptable for fan support" and use mounting screws provided with the outlet box
most outlet boxes commonly used for the support of lighting fixtures are not acceptable for
fan support and may need to be replaced. Consult a qualified electrician if in doubt.
7.
After installation is complete, check that all connections are absolutely secure.
8.
After making electrical connections, spliced conductors should be turned upward and
pushed carefully up into outlet box. The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor on one side of the outlet box.
9.
WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-
state fan speed control device, or rheostat.
10.
Do not separate the reverse switch until the fan has come to a complete stop.
11.
Do not insert anything into the fan blades while they are rotating.
12.
WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred
to as "flanges") during assembly or after installation. Do not insert objects in the path of the
blades.
13.
To avoid personal injury or damage to the fan and other items, be cautious when working
around or cleaning the fan.
14.
Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
15.
The fan is suitable for indoor use only.
NOTE: The important safety precautions and instructions appearing in the manual are not meant
to cover all possible conditions and situations that may occur. It must be understood that common
sense and caution are necessary factors in the installation and operation of this fan.
NOTE: This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities are different or are impaired, or lack of experience or knowledge,
unless such persons are supervised or trained to operate the appliance by a person responsible for
their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.
12
Publicidad
