Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE INSTALLATION
Unpack your fan and check the contents.You should have the following:
1. Fan motor assembly 2. Canopy 3. Hanger bracket 4. Coupling cover 5. Downrod & hanger ball 6.
Optional downrod 7. Hardware bag (Wood screws , Expansion screws, Plastic anchor, Balance tapes)
8. Remote control set 9. Light Kit 11. Glass shade 12. Blades
INSTALLING THE FAN
Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step
ladder, and wire cutters.
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are 12"(300 mm) spacing from the
tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to turn off the
power. Follow the instruction below to hang your fan properly:
1.
For concrete ceiling, drill two holes in the ceiling and
secure the mounting bracket to the ceiling with two
Φ0.32"(8mm) (distance between the two holes should
be appropriate) expansion screws, fl at washers,nuts
provided and tighten with a spanner.
2.
For wood ceiling, Secure the mounting bracket to
the ceiling is capable of carrying a load of at least
100lbs(45kgs) with two long mounting screws and
washers provided. Be sure at least 0.12" (30 mm) of the
EN
13
Publicidad
