How To Charge Multiple Devices - pclocs iQ 16 Sync Charge Box Manual De Instrucciones Para El Usuario

Set up
1. If the iQ 16 Sync Charge Box is in any packaging, remove this to ensure good ventilation and dispose of
responsibly.
2. If the iQ 16 Sync Charge Box is fitted in the trolley/cart drawer, no relocation is necessary.
3. Ensure the iQ 16 Sync Charge Box power-switch is OFF and the mains power outlet is switched OFF.
4. Insert the power cord into the iQ 16 Sync Charge Box, and plug the other end into the mains power
outlet. Switch the mains power outlet ON.

How to charge multiple devices

1. Connect all the devices required to be charged to the iQ 16 Sync Charge Box USB sockets using only
approved USB cables. The devices may be connected to any of the USB sockets, in any order and any
sequence.
2. Switch the iQ 16 Sync Charge Box power-switch ON. The Charge light and Sync light will illuminate
momentarily, and then the Charge light will remain ON. All the devices are now charging.
3. To check the charge status of any device, momentarily switch the selected device ON and check it's
on-screen charge indication.
4. When all the devices are fully charged, switch the iQ 16 Sync Charge Box OFF.
How to synchronize multiple devices
1. Connect all the devices required to be synchronised to the iQ 16 Sync Charge Box USB sockets using
only approved USB cables. The devices may be connected to any of the USB sockets, in any order and
any sequence.
2. Switch the iQ 16 Sync Charge Box power-switch ON. The Charge light and Sync light will illuminate
momentarily, and then the Charge light will remain ON. All the devices are now charging.
3. Connect the iQ 16 Sync Charge Box to the host computer which contains the synchronizing software
using an approved Type A to Type B USB cable.
4. Upon connecting the iQ 16 Sync Charge Box to the host computer, the unit will automatically switch
from Charge Mode to Sync Mode and this will be signified by the illumination of the Sync light.
PLEASE NOTE: The devices will continue to charge at a reduced rate.
5. Removing the USB cable from the host computer will return the iQ 16 Sync Charge Box into Charge
Mode and the devices will automatically resume charging if needed.
INSTRUCTION MANUAL