Descargar Imprimir esta página

HyLoft 00625 Instrucciones De Instalación página 3

Ocultar thumbs Ver también para 00625:

Publicidad

Idiomas disponibles

Idiomas disponibles

Ceiling Joist
Adjust
Downrods
to Desired
Length
2A
Connect two-Piece
Downrods to center
hole in Ceiling Angle
PLACE AND ATTACH GRIDS
Sticker
You have now completed the installation and are ready to load your new HyLoft Storage Unit.
(Maximum 250 lbs. per 45" x 45" unit, evenly distributed). Place the sticker provided on a
support bar for easy reference information.
Periodically (at least annually) check all connections to ensure that they remain tightly fastened.
Installing Two HyLoft 45 x 45 Units:
Follow the instructions above. Multiple Units may be joined together by using tie straps provided.
v.44010306
3A
Lay both 15" Wire Grids (A)
evenly on Support Bars and
attach as shown. Note: Long
grid wires are on the bottom.
four-wire clusters
nearest downrods
ATTACH DOWNRODS
and SUPPORT BARS
Insert end plugs
before attaching
M
2B
3B
Lay 13" Wire Grid (B) on top of
Support Bars, between the two
15" grids (A), and Bolt Together
using 2 bolts (J), washers (L)
and nuts (K) on each side.
Page 4 of 15
Connect Support Bars
to Downrods
M

Publicidad

loading

Este manual también es adecuado para:

00626