Publicidad
Idiomas disponibles
Idiomas disponibles
Before Using This Product
The lens may not perform as expected and
some features may not be available with out-
dated lens or camera fi rmware. Be sure to up-
date the lens and camera fi rmware to the latest
versions. Instructions on viewing fi rmware ver-
sion information and updating fi rmware are
available from the following website:
https://fujifilm-x.com/support/download/firmware/
If you do not have access to a computer, sup-
port is available from the local distributor
listed in the "FUJIFILM Worldwide Network"
material provided with your camera.
Product Care
•
When using a lens hood, do not pick up or
hold the camera using only the hood.
•
Keep the lens signal contacts clean.
EN-4
•
Use a blower to remove dust and lint from the
glass surfaces of the lens or fi lter. To remove
smudges and fi ngerprints, apply a small
amount of lens cleaner to a soft, clean cotton
cloth or lens-cleaning tissue and clean from
the center outwards using a circular motion,
taking care not to leave smears or touch the
glass with your fi ngers.
•
Never use organic solvents such as paint
thinner or benzene to clean the lens.
•
Attach the front and rear caps when the lens
is not in use.
•
Store the lens and fi lter in cool, dry locations
to prevent mold and rust. Do not store in
direct sunlight or with naphtha or camphor
moth balls.
•
Keep the lens dry. Rusting can cause irrepara-
ble damage. Wipe off rain and water droplets.
•
Leaving the lens in extremely hot locations
could cause damage or warping.
ENGLISH
Publicidad
