RIDGID R8720 Manual Del Operador página 5

FEATURES
PRODUCT SPECIFICATIONS
Anvil ........................................................................... 3/8 in.
No Load Speeds:
Low (1) ....................................0-1,600/min. (RPM)
Medium (2) ..............................0-2,400/min. (RPM)
High (3)....................................0-3,200/min. (RPM)
Auto Mode (A) .........................0-2,100/min. (RPM)
Impacts per minute .........................................0-3,800/min
Max Breakaway Torque .......................................250 ft.-lbs
ASSEMBLY
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing or
damaged. Use of a product that is not properly and
completely assembled or with damaged or missing
parts could result in serious personal injury.
If any parts are damaged or missing, please call 1-866-539-1710 for assistance.
OPERATION
WARNING:
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
WARNING:
Always remove battery pack from the tool when
you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could
cause serious personal injury.
WARNING :
Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your
eyes, resulting in possible serious injury.
(R8720)
5 - English
PRODUCT SPECIFICATIONS
Anvil ........................................................................... 1/2 in.
No Load Speeds:
Low (1) ....................................0-1,600/min. (RPM)
Medium (2) ..............................0-2,400/min. (RPM)
High (3)....................................0-3,200/min. (RPM)
Auto Mode (A) .........................0-2,100/min. (RPM)
Impacts per minute .........................................0-3,800/min
Max Breakaway Torque .......................................250 ft.-lbs
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use this tool for the purposes listed below:
 Tightening and loosening nuts and bolts using an impact
rated socket
OVERLOAD PROTECTION
When the tool is forced or overloaded, the Li-ion battery
pack will automatically shut off the tool. To reset the tool,
release the trigger and resume operation. If the tool still does
not resume operation, remove and reinsert the battery. Do
not force the tool.
HIGH TEMPERATURE PROTECTION
Li-ion battery packs are equipped with a high temperature
protection feature that automatically deactivates the tool
when it is overheated. To resume operation, allow the battery
and tool to cool and then squeeze the trigger.
(R8721)