Publicidad
Idiomas disponibles
Idiomas disponibles
Description
1.
Front panel
2.
Air outlet
3.
Handle
4.
Control panel
5.
Filter
6.
Back panel
This product is a dehumidifier. It controls relative humidity by passing the air through the
unit, forcing the excess moisture to condensate over the cooling elements (evaporator).
Contact with this cold surface causes the moisture in the air to condense. This condensed
water then drains safely into the water tank. The dried air then passes through the
condenser where it is slightly warmed and re-enters the room at a slightly elevated
temperature. Your health and possessions thrive best in a humidity between 45% and
65%.
Position
Excess moisture will travel throughout your home, in the same way that cooking smells
waft to every room in the house. For this reason, the dehumidifier should be positioned, so
that it can draw this moist air towards it from all over the home.
Alternatively, if you have a serious problem in one area you can begin by positioning the
dehumidifier close to this area and later moving it to a more central point.
When positioning the dehumidifier, ensure that it is placed on a level surface and that
there is a minimum of 20 cm (8") of space on either side of the unit to allow for efficient
airflow.
If you move the unit, it should first be switched off and the water tank emptied.
We do not recommend the use of an extension lead, so please try to ensure that the unit is
sufficiently close to a fixed mains socket. If it is necessary to use am extension lead, use
7.
Water tank
8.
Rubber feet (DryBest 10)
Castors (DryBest 20)
9.
Electric cable
14
Publicidad
