Korenix JetNet 5628G Guia De Inicio Rapido página 3

2.2 Fast Ethernet Module: There are 3 available slots for Fast Ethernet Modules.
2.3 On Board Fixed Ports: 4 10/100/1000Mbps combo with 4 Gigabit SFP sockets.
2.4 Front Switch with Cap: Easy to turn on/off the switch after mounted to rack.
2.5 Digital Input/Output: 8 pin terminal block for Digital Input and Output.
2.6 AC/DC Socket: AC plug for 85-264VAC and DC input (18-48VDC or 88-370VDC).
2.7 RS232 Console: DB-9 RS232 console for out band management.
3. Mounting the Fast Ethernet Module
3.1 Turn off the switch by the front power switch(JetNet 5628G/5828G).
3.2 Unlock the front plate of the slot and plug the Fast Ethernet Module into the socket.
3.3 Turn the captive screw to lock the module.
3.4 After locked the modules, turn on the switch.
Note: Each time when you plug or
exchange module, be noticed that
you should turn off the power
4. Port number of slots: There are 3 slots which provide maximum 24 ports. The slot 1
represents port 1 to 8; the slot 2 represents port 9-16; the slot 3 represents port 17-24. Some
of each slot still starts from port 1, 9 and 17. The 4 On board Gigabit combo ports always
represent port 25-28.
Slot 1
Slot
Web CLI
Module
1~8 fa1~fa8
JNM5-8TX
1~8 fa1~fa8
JNM5-4TX/4SFP
JNM5-2SFP/4MSC
1~6 fa1~fa6
JNM5-2SFP/4SSC
Slot 2 Slot 3
Web CLI Web CLI
9~16 fa9~fa16 17~24 fa9~fa16
9~16 fa9~fa16 17~24 fa9~fa16
9~14 fa9~fa14 17~22 fa9~fa14
On Board
Web CLI
25~28 gi25~gi28
25~28 gi25~gi28
25~28 gi25~gi28