Mercalor MT01559 Manual De Instrucciones página 27

ASSEMBLY PROCEDURES
1. To protect heater from strong wind,anchor
the base securely to the ground with screws.
Reverse the base,fix the ground fixer to the
base with bolt M6 x 10 and washer Ø6 like
pictures shows. Secure the ground fixer with
bolts and nuts, and reverse the base
Material used
Washer Ground fixer
Ø6
(Qty 6)
Nut
M6
(Qty 6)
Bolt
M6 x 10
(Qty 3)
(Qty 6)
Wrench
(Qty 1)
2. Assemble the tank housing.
Secure the tank housing to the base using
4pcs screw M5 x 10
Material used
3 Assemble the heaing body.
Secure the heating body to the
tank housing using 4pcs screw
M5X10.
Material used
Screw
M5 x 10
(Qty 4)
27
Philips screwdriver
Screw
(Qty 1)
M5 x 10
(Qty 4)
Philips screwdriver
(Qty 1)