Publicidad
Idiomas disponibles
Idiomas disponibles
and the smoke will no longer be emitted within a few minutes.
Ventilate the room during the first operation.
-
Place the appliance on a stable, flat, horizontal, and heat-resistant
surface;
-
Close the appliance door;
-
Connect the plug to a grounded power socket;
-
The spy
-
Set up and run the DIY program as follows:
1.
Press the bottom
o
2.
Press the bottom
3.
Press the bottom
to 200 ° C;
4.
Press the bottom
minutes;
5.
Press the bottom
work, and the interior light will light.
-
At the end of the program, the appliance will emit a "BEEP" 5 times, and
the display will turn off.
The fan will remain active for approximately 30 seconds.
After the fan has stopped, disconnect the socket's plug and let the
-
appliance cool down.
Note: before using the oven for the first time, perform the operations indicated
in the paragraph "Before using the appliance."
-
Place the appliance on a stable, flat, horizontal, and heat-resistant
surface;
-
Insert the dripping pan (11) into the oven;
-
Place the ingredients on the grill (12), on the rotating basket (15), or on
the rotisserie (13);
-
Insert the chosen accessory into the appliance and close the door;
-
Connect the plug to a grounded power outlet.
-
The indicator light
First test ignition
will flash.
to turn on the display;
Note: If no button is pressed within 30 seconds, the display
turns off, and the indicator light
and select the DIY program;
, use the bottoms
, use the bottoms
to start the operation. The appliance starts to
USE OF THE APPLIANCE
will flash.
26 / 88
flashes.
to set the temperature
to set the time to 10
Publicidad
