EUFY MACH V1 Manual Del Propietário página 17

Clean the Rolling Brush Manually
The multi-surface rolling brush can be cleaned automatically through self-cleaning, but some foreign substances, such as
hair, can easily get tangled in the rolling brush, so it is best to clean the rolling brush manually if it occurs.
• Before removing the rolling brush cover, make sure the MACH Vacuum Cleaner has been turned off.
1
Pull out to open the cover.
2
Press the release button and then pull up to remove the rolling brush.
3
Clean the rolling brush with the supplied cleaning tool.
4
Reinstall the rolling brush: Insert the end of the rolling brush into the right side of the holder, then press down
the release button into the left side of the holder. Make sure the rolling brush is installed properly, otherwise it
may be damaged during use.
5
Reinstall the rolling brush cover.
1
2
4
3
5
EN 15