B&G electronics DUAL-VOX LTC-07 DUAL-VOX LTC-07L Manual De Instrucciones página 7

LTC LTC
CONFIGURATION
Adjusting the internal volume
Use the Listen knob to adjust the volume at
which the customer's voice is heard on the
inner side.
Adjusting the external volume
Use the Talk knob to adjust the volume
at which the teller's voice is heard on the
external speaker.
Headset use (optional)
The equipment allows to connect only one
headset with an incorporated microphone
(RJ9 or 3.5mm) for the use inside the barrier.
1. Connect the headset to the respective
connector.
2. Move the second sliding switch to its left
position, labeled HDS.
Calibration procedure
Once all the components are connected, perform the calibration procedure so that the
intercom operates optimally according to the sound insulation of the barrier and the
ambient noise of the location.
This procedure requires two people, one on the inside of the barrier and the other on the
outside.
Important note: For proper operation of the equipment is important to calibrate it to suit
the sound insulation of the barrier.
External sound calibration
1. Switch on the equipment in automatic mode (see "Automatic Mode" in "Intercom
modes").
Listen
Volume
Volume
RJ9
ON
3.5mm
OFF
SIREN
2
7 7
Talk
1