Publicidad
Idiomas disponibles
Idiomas disponibles
5
"Snap" the wheel cover into the right place,
repeat the process for the other three wheels.
7
Put the seat support into the right place and
fasten with 2 screws as the photo show.
6
" Snap" the front bumper into the slots in the
front side of vehicle and fasten with 4 screws
as the photo show.
8
Screw
(4x14mm)
Put the one part of seat onto the right place
and fasten with 2 screws as the photo show.
42
Screw
(4x14mm)
Screw
(4x14mm)
Publicidad
