Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM SOLUTION
1. REASONS FOR DIFFERENT CHARGING TIMES?
▶Your charge time can be affected by many reasons, which are not defects in your product. If the battery pack is only partly discharged, it may be
re-charged in less than 1 hour. If the battery pack and ambient temperature are very cold, then re-charging may take 1-1.5 hours. If the battery
pack is very hot, it will not re-charge because the internal temperature safety cutout will prevent it. If the battery pack is very hot, you must
remove your battery pack from the charger and allow your battery pack to cool first to ambient temperature and then recharging can be started.
2. REASONS FOR DIFFERENT BATTERY PACK WORKING TIMES?
▶Charging time problems, having not used a battery pack for a prolonged time will reduce the battery pack working time. This can be corrected
after several charge and discharge operations by charging & working with your drill. Heavy working conditions such as large screws into hard
wood will use up the battery pack energy faster than lighter working conditions. Do not re-charge your battery pack below 10ºC and above 30ºC
as this will affect performance.
3. WHY CAN SEE SPARKS THROUGH THE VENTILATION SLOTS?
▶Occasionally you may see sparks through the ventilation slots. This is normal for brush motor, and it will not damage your power tool.
MAINTENANCE
▶Remove the battery pack from the tool before carrying out and adjustment, servicing or maintenance.
▶Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool.
▶Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
▶Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep Tall working controls free of dust.
Instruction manual
ref. 08373
ES
PT
EN
FR
Publicidad
