Samsung QN55Q8CNAF Manual Del Usuario página 8

02 TV Installation
One Invisible Connection Guide
TV
To connect the One Invisible Connection to the One Connect and your TV, follow these steps:
1. After the TV is completely set up and placed in its final position, connect the thicker connector of the One
Invisible Connection to the TV, and then connect the thinner connector to the One Connect as shown in
Steps 1 to 4 above.
WARNING: Make sure that both connectors are fully and firmly connected. If either connecter is not
connected properly, there is a danger of severe electric shock.
2. Connect the One Connect AC power cord to the One Connect, and then connect the cord to a wall outlet as
shown in Step 5 above.
WARNING: Follow the directions exactly. Be sure to connect the power cord to the wall outlet as the
last step. Always disconnect the power cord from the wall outlet before disconnecting the One Invisible
Connection from the back of the TV or from the One Connect.
– See the illustrated Quick Setup Guide for more information.
English - 8
ONE CONNECT
4 inches
Bending Cover
ONE CONNECT
5
ONE CONNECT
ONE CONNECT