Publicidad
Idiomas disponibles
Idiomas disponibles
before turning the power tool on. A wrench or
a key left attached to a rotating part of the power
tool may result in personal injury.
● Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
● Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
● If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
● Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles. A careless
action can cause severe injury within a fraction
of a second.
POWER TOOL USE AND CARE
● Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
● Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
● Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments,
changing
storing power tools. Such preventive safety
Page 4
GENERAL SAFETY RULE
accessories,
measures reduce the risk of starting the power
tool accidentally.
● Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
●
Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
● Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
● Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
● Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
SERVICE
● Have your power tool serviced by a
qualified repair person using only identical
or
replacement parts. This will ensure that the
safety of the power tool is maintained.
Publicidad
