Publicidad
Idiomas disponibles
Idiomas disponibles
9. Connecting an external playback device
You can use the AUX IN connection to connect an external playback device (for
example a CD player or MP3 player).
Switch the party speaker off.
Switch on your external device.
Plug the end of a 3.5 mm cinch cord (not supplied with the device) into the AUX
IN plug on the top of the party speaker.
Connect the other end of the cord to your external device.
Switch on your external device.
Switch the party speaker on.
Press the MODE button several times until you see AUX in the display.
The audio signal from your external device will now be played back.
The track playback is controlled via the external device. The volume can
be controlled both on your external device and the party speaker.
10. Inserting USB memory sticks
If necessary, remove the protection cover and insert the USB drive into the USB
slot on the top of the party speaker.
Press the MODE button once or several times to select the operating mode you
require.
USB will appear on the display.
Please note the following when connecting a USB stick:
•
Due to the numerous different file systems and file formats, compatibility with
the connected memory media cannot be guaranteed.
•
Depending on the size of the data medium, it may take some time for the
system to be detected.
•
The FAT32 file system is supported; the supported file format is MP3.
•
USB sticks up to 32 GB are supported.
•
External hard disks are not supported.
11. Inserting SD memory card
Insert the SD memory card into the slot on the top of the party speaker. The
card's contacts show towards the front of the device.
Sd will appear in the display.
DE
EN
FR
ES
IT
NL
47
Publicidad
