(1) Mounting bracket
(2) Fixation screw
(3) Safety eyelet
(4) Objective-lens/Focus
(5) Mirror
(6) Housing cover
(7) Housing screws
(8) DMX-Out socket
(9) DMX-In socket
(10) Power supply
(11) Fuseholder
(12) Control Board
(13) Sensitivity-control
(14) Venting slots
(15) Enter-button
(16) Down-button
(17) Up-button
(18) No-button
(19) Yes-button
(20) Display
(21) Control LED
INSTALLATION
Installing/Replacing the lamp
For the installation, you need one EHJ 24 V/250 W G-6,35 lamp.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
20/52
51785810X47NXS_V_1_0.DOC