Gewiss JOINON GWJ1023W Manual De Instalacion Y Uso página 65

Device installation and connection
3. Switch ON the residual current protection and circuit breaker protection, and power the column.
3.1 For the column with Restart, activate the device as shown below.
Power the column and make sure the device LED is lit up (green)
4. Check the residual current protection is working properly, by pressing the relative test button key.
7.55.4.565.7 - Installation and Operation Manual Installation and Operation Manual
1
Gewiss
IT
EN
RESTART
FR
ES
2
DE
RO
HU
NL
65