EDSAL Muscle Rack LR4747-SV Instrucciones De Montaje página 5

Assembly Instructions
Step 5
- Install Beams (C)
Assemble the four Beams (C) to each post by inserting the two rivets, located on each end of the beam, into the two
lower keyhole slots of the post. Use a rubber mallet to tap the down on the each beam to seat the rivets into the
bottom of the keyhole slots.
C
C
Step 6
- Install Tie Support (D)
Install the Tie Support (D) by inserting the two end tabs into the slotted holes located in the center of the beams.
Step 7
- Install Side Rail Beams (E)
Assemble the two Side Rail Beams (E) by inserting the two end rivets into the keyhole slots of each post at the
same height. Use a rubber mallet to tap the down on each side rail beam to seat the rivets into the bottom of the
keyhole slots.
C
C
D
E
E
C
✓