Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
CLEANING
• Always unplug the appliance before you clean it.
• Never immerse the appliance in water or any other liquid.
• Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any
part of the appliance.
BODY OF THE APPLIANCE
Regularly clean the inside and outside of the body to prevent dust from collecting.
1. Wipe away dust with a soft dry cloth from the body of the appliance.
2. Clean the air inlet and the air outlet with a soft dry cloth.
PRE-FILTER SCREEN
The pre-filter/charcoal layer collects larger dust and debris and should be cleaned monthly or
more frequently depending on use. Remove and clean regularly with the brush attachment of
your vacuum cleaner. This will remove the lint and dirt and help maintain the life of the filter.
(See filter replacement to locate and clean or remove the filter).
Replacement pre-filters are available by visiting our website at guardiantechnologies.com.
Note: Do NOT stick any foreign objects or your fingers inside the unit.
Caution: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on and/or in the
unit while cleaning as they will damage the products. NEVER use alcohol or other solvents.
E-8
TROUBLESHOOTING GUIDE
PROBLEM
SOLUTION
Unit shuts off unexpectedly
Check if the unit is in auto mode. If unit is running quiety on
or does not operate.
low speed, it may be on auto mode due to good air quality.
Press the power button to increase the speeds.
Check that the unit is plugged into a working electrical outlet.
Check to see if the bottom cover is installed correctly.
Unplug/replug into the outlet.
Call customer service.
No air circulating from the unit. Unplug unit. Check filter. Clean or replace filter if necessary.
Odors not removed.
Make sure the filter is clean. Replace if necessary.
Discharged air has an odor.
Check to see if the filter is heavily soiled. Replace if necessary.
Increase in noise level.
Make sure the filter is clean. Replace if necessary.
Intellisense ai
Air Quality
Replace filter and reset light.
™
Monitor Light is flashing.
Air quality status remains poor. Check to see if the filter is heavily soiled. Replace if necessary.
Increase the fan speed to circulate air. Using compressed air,
blow out the air quality monitor sensor.
E-9
Publicidad
