Publicidad
Idiomas disponibles
Idiomas disponibles
6. CHANNEL PRESET
6.1 AUTO SEARCH
You can set your TV to receive local TV channels (from an antenna) or CATV channels (when you have Cable TV
service ). Then, use AUTO SEARCH to set up the channels that are available for you. This makes it easy for you
to select only the available TV stations when press the CHANNEL UP or DOWN button. Before you start AUTO
SEARCH, connect the Antenna or CATV signal as detailed.
Activate the PRESET menu.
Press the CHANNEL DOWN button to enter submenu selection.
Press the CHANNEL UP/DOWN button to select TV/CATV.
Press the VOLUME UP/DOWN button to select TV or CATV to be the signal
source.
Press the CHANNEL UP/DOWN button to select Auto search.
Press the VOLUME UP button to start the auto searching, and then all available
channels will be stored from No.1(in CATV mode) or No. 2(in TV mode) and
upward in order. Auto-searching will stop after all the frequency bands are
searched, and the last programme which you select before auto search action
will reappear on the screen. Press the VOLUME DOWN button if you need to
stop AUTO SEARCH during the process.
NOTE:
Press and hold the MENU button on the front panel of the unit for a few
seconds to start auto search action directly.
6.2 MANUAL CHANNEL TUNING
Manual Channel Tuning lets you quickly select the next available channel.
For example, if you are looking for a channel between 60 and 70, start the
search at channel 60 and go up.
First select the signal source. Activate the PRESET menu.
Press the CHANNEL DOWN button to enter submenu selection.
Press the CHANNEL UP/DOWN button to select TV/CATV.
Press the VOLUME UP/DOWN button to select TV or CATV(whichever you have).
Press the CHANNEL UP/DOWN button to select Channel.
Press the VOLUME UP/DOWN button to enter a Channel No. at which you
want to begin the search.
Press the CHANNEL UP/DOWN button to select Manual.
Press the VOLUME UP button to start searching upward(for example, starting at
channel 60 and going up to 61, 62, 63,etc.). Press the VOLUME DOWN button
when you find the channel you want. This stop the search, otherwise the search
will stop at the first available channel.
Or press the VOLUME DOWN button to start searching downward(for example,
starting at channel 60 and going up to 59, 58, 57,etc.). Press the VOLUME UP
button when you find the channel you want. This stop the search, otherwise the
search will stop at the first available channel.
When fine tuning is completed, press the MENU button to quit menu, or menu
will quit after a few seconds without further action.
6.3 FINE TUNING
Fine tuning function may improve the receiving quality for some weak /unstable
channels by adjusting the channel frequency manually.
First select the signal source. Activate the PRESET menu, then the highlight
bar is on TV/AV. Press the VOLUME UP/DOWN button to select TV or CATV
to be the signal source.
Press the CHANNEL UP/DOWN button to select Channel, then press VOLUME
UP/DOWN button to entera channel No., e.g. 08.
14
TV/CATV
TV
Channel
2
Add/Erase
Add
Manual
Up
Fine
0
Auto search
F a v o u r i t e l i s t
Programming
P l e a s e W a i t
TV
3
TV/CATV
CATV
Channel
60
Add/Erase
Add
Manual
Up
Fine
0
Auto search
F a v o u r i t e l i s t
CATV
TV/CATV
Channel
61
Add/Erase
Add
Manual
Up
Fine
0
Auto search
F a v o u r i t e l i s t
CATV
TV/CATV
Channel
59
Add/Erase
Add
Manual
Down
Fine
0
Auto search
F a v o u r i t e l i s t
CATV
TV/CATV
Channel
59
Add/Erase
Add
Manual
Down
Fine
0
Auto search
F a v o u r i t e l i s t
Publicidad
