Sage the 3X Bluicer Guía Rápida página 7

Assembly
BEFORE FIRST USE
Wash the lid, inner measuring cup, jug,
the filter bowl surround, filter basket, juicer
cover, food pusher and pulp container in
warm, soapy water with a soft cloth. Rinse
and dry thoroughly.
Place motor base on a flat, dry surface
such as a countertop. Ensure that the
appliance is switched to OFF at the motor
base and the power cord is unplugged.
JUICING
1. Place filter bowl surround on top of the
motor base.
2. Align the arrows at the base of the
stainless-steel filter basket with the
arrows on the motor drive coupling and
push down until it clicks into place to
create a secure fit with the motor base.
3. Place the juicer cover over the filter
bowl surround, positioning the
lower part of the feed chute over
the stainless steel filter basket.
4. Raise the safety locking arm up
and locate into the two grooves on
either side of the juicer cover.
7