Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATIONAL ELEMENTS AND CONNECTIONS - REMOTE CONTROL
8
9
10
1
11
12
4
5
6
2
3
7
• Before using the remote control the supplied
batteries must be inserted into the battery
compartment located at the rear of the
remote control.
• If the batteries have run out after prolonged
use, please replace them (type AAA).
• To prevent causing damage to the remote
control please remove the batteries if the
device is not going to be used for a prolonged
period.
1 AMP
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate
the power switch located on the rear of the
device. Conversely the device can be switched
from power operation to the standby mode.
2 SOURCE (INPUT SELECTON)
Switches between the different audio sources:
(see also FRONT PANEL, Pos. 6). The active
input is indicated in the display..
3 DIRECT
The device is switched to the linear mode.
The TREBLE, MID and BASS levels cannot be
adjusted in this mode. DIRECT ON appears in
the display.
4 LOUDNESS
Selection of the Loudness function
(aurally compensated volume correction).
5 DIM
This button can be used to adjust the brightness
of the display (3 levels).
6 VOLUME
Increases (+) or decreases (-) the volume.
7 MUTE
Switches the sound on and off.
8 SKIP TRACK BACKWARDS
(BLUETOOTH OPERATION)
Pressing this once starts the track currently
being played on a Bluetooth source device from
the beginning. Repeatedly pressing the button
allows you to skip to previous tracks.
9 SKIP TRACK FORWARDS
(BLUETOOTH OPERATION)
Pressing this once starts the track currently
being played on a Bluetooth source device from
the beginning. Repeatedly pressing the button
allows you to skip to subsequent tracks.
10 PLAY/PAUSE (BLUETOOTH OPERATION)
Pauses the current track on a Bluetooth device
or resumes playback.
11 DISCONNECT (BLUETOOTH OPERATION)
Closes an existing Bluetooth connection and
starts the pairing mode
12 MONO
A brief press switches between Stereo and
Mono mode.
Note: This function is not available when using
the Bluetooth input and the digital inputs.
SOURCE GAIN and SOURCE RENAME Menu
A long press opens the SOURCE GAIN and the
SOURCE RENAME menu.
(Note: When using the BLUETOOTH and LINE IN
modes, only the GAIN menu can be selected!)
The SOURCE +/- buttons can then be used to
select either SOURCE GAIN or SOURCE RENAME.
Confirm your selection by briefly pressing the
MONO button. When the GAIN menu is selected,
you can make the current source louder or
quieter by using the SOURCE +/- buttons (+/- 6 dB).
15
The set value is confirmed by briefly pressing
the Mono button.
When the SOURCE RENAME menu is selected,
you can choose your own name for the current
source (maximum of 14 digits).
Navigate through letters and numbers by using
the Source +/- buttons. Confirm the individual
digits by briefly pressing the Mono button.
The last digit entered can be deleted using the
selection box ( ). When the desired name has
been set, confirm it with ( ).
The non-numbered buttons are reserved for
operating the Magnat MMS 730 and have no
function for the MA 900.
Publicidad
