ninco4rc 1/10 SIOUX DESERT RTR 2,4Ghz Manual Del Usuario página 5

Please read carefully the instructions before using the car.
FEATURES:
NH930054 1/10 SIOUX DESERT RTR 2,4GHZ
Length Width
475mm 250mm
CONTENTS:
Items needed for running
Transmitter 2,4Ghz
NOTE:
-Charge the battery for 8-10 hours for the first time usage. Do not charge the battery
unattended.
-When the car is blocked, do not continue to pull/push the trigger, this will cause the ESC
to overheat and damage the ESC
The following items, not included in the kit, are required for assembling your model:
Hexagonal screwdriver
Scissors
Height Wheel
base
160mm 265mm
Car
Transmitter 2,4Ghz
Motor
Servo-ESC-RX
Battery Ni-MH 7,2v 1800mAh
8 AA batteries required
4-way cross wrench
needle nose cutter
Gear Ground
ratio clearance
1:8.13 32mm
4-way cross wrench
Wire cutter
ENGLISH
Wheel Wheel
diameter width
85mm 30/40mm
mini screwdriver
Motor*
Rc550