Publicidad
Idiomas disponibles
Idiomas disponibles
English
Oscillation
Select the automatic swinging direction by pressing in the knob. The device
swings automatically within a range of 90°. This function is active only when the
fan is on. To deactivate the function, pull out the setting knob.
Cleaning
Clean the surface of your fan with a dry cloth if it is covered by dust.
•
Usually pay attention to the operation. If the blade doesn't rotate freely or,
•
it sounds any in normal noise, please refer to your supplier!
Use a vacuum-cleaner to suck out the dust of the blade, the grilles and the
•
inner parts.
Important Note:
Do keep your fan disconnected to the electricity before doing any
maintenance!
Warning
• If you need to remove the safety guard: always switch the device off
and remove the mains plug.
• Under no circumstances should you immerse the device in water for
cleaning purposes. Otherwise this might result in an electric shock or
fire.
•
Clean the outside of the device with a dry cloth without any additives.
•
If the device is very dirty wet a cloth with water and then wipe the device
dry once you have finished.
Conformity
This device has been tested according to all relevant current CE
guidelines,
2014/30/EU, and Low Voltage Directive 2014/35/EU, and has been
constructed in accordance with the latest safety regulations.
4
such
as
electromagnetic
compatibility
Directive
Instructions for use
Publicidad
