Descargar Imprimir esta página

Tripp-Lite SmartPro SMART2200RM2U Manual Del Usuario página 12

Ocultar thumbs Ver también para SmartPro SMART2200RM2U:

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Operation
Automatic Voltage Regulation Icon: Indicates that the AC input is either low
or high and that the AVR function is actively boosting or cutting the line. The
AVR icon is also used in conjunction with the EVENTS icon to indicate AVR
events.
EXTERNAL BATTERY Icon (Select Models): Displayed only when the EXTERNAL
BATTERY SETTING CONTROL is active.
BATTERY CAPACITY Icon: Used to better describe the battery capacity bar
graph.
Display Power Conditions
Use the
button to advance through power conditions.
1. Voltage In
5. Load Wattage*
*
Load Wattage is displayed in watts up to "999", and then will be displayed in Kilowatts.
** The Kilowatt Hour usage per day reports daily power consumption of equipment connected to the UPS in
KWH in a 24-hour cycle. Press and hold the
Note: When the UPS is in Battery Mode (power is supplied to the output from the batteries), the BATTERY icon
will be lit in the display instead of the AC INPUT icon.
15-06-021-93-3088.indb 12
continued
2. Voltage Out
6. KWH/Day**
button for 4 seconds to reset the accumulator to "0".
12
3. Estimated Runtime
(in minutes)
7. Battery Capacity %
4. Load %
6/3/2015 10:09:24 AM

Publicidad

loading