Publicidad
Idiomas disponibles
Idiomas disponibles
Equipment description
1. Additional handgrip
2. Speed control
3. On/off switch
4. Mains cable
5. Suction/blowing mode lever
6. Adjustable carrying strap
7. Collection bag, 45 l
8. Rollers
9. Suction tube
Technical data
Voltage
Rated input
Idle speed
Blowing speed max.
Volume flow rate
Reduction rate
Sound pressure level (LPA)
(Uncertainty K = 3 dB)
Sound power level (LWA)
(Uncertainty K = 3 dB)
Hand vibration
(Uncertainty K = 1,5 m/s²)
Safety class
We recommend that you use ear and eye protection during use.
Noise and vibration information
Measured values determined according EN 50636
-
The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare one
tool with another.
-
The given vibration emission level may be used for the initial estimation of the real exposure.
-
The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
Try to keep the exposure as low as possible. To reduce the vibration emission level the user
-
should wear working-gloves and use the machine for limited time.
All parts of working cycles have to be considered (including the time the power tool is
-
switched off, and the time, when the power tool is running under no-load condition).
220-240 V AC / 50 Hz
3000 W
-1
8000-14000 min
approx. 275 km/h
400-800 m³/h
10:1
86,20 dB(A)
98,48 dB(A)
max. 4,671 m/s²
/ II
GB - 11
Publicidad
