Publicidad
3.
TECHNICAL SPECIFICATIONS
Input
Output
Operating Temperature
Storage Temperature
Contacts
Dimension (without battery adaptor)
Weight (without battery adaptor)
Regulatory Approvals
Water Resistant
4.
BATTERY OPERATION
FUEL GAUGE: Each LLS-2054BE-DBL battery is equipped with a fuel gauge that displays
the relative charge state of the battery. To activate the fuel gauge, press the small circular
button next to the gauge. Each LED on the fuel gauge represents 25% of the fully charged
capacity. Below is the fuel gauge legend:
•
All four LEDs illuminated – Capacity = 76 – 100%
•
Three LEDs illuminated – Capacity = 51 – 75%
•
Two LEDs illuminated – Capacity = 26 – 50%
•
One LED illuminated – Capacity = 10 – 25%
•
One blinking LED – Capacity < 10%
CHARGING: The LLS-2054BE-DBL should only be charged with ST Technologies
supplied smart battery chargers. To charge, orient the battery to line up the charger and
battery contacts, and place the battery into the slot. Do not force the battery into the slot.
Refer to the charger Instructions for Use (IFU) for a detailed operation.
ABOUT SMBus and SBS: The Smart Battery System defines the parameters that are
stored by an SBS-compliant battery. These parameters include full battery status and fuel
gauging information. The System Management Bus is the language by which these
parameters are communicated between the battery, the charger and the host device.
®
LIT-245 CUDA
Surgical
Rev. B
Item
Page 4 of 35
Specification
16.8V
4.83A max
14.4V
nominal, 8.5A max.
32⁰F to 113⁰F (0⁰C to 45⁰C) while charging
-4⁰F to 140⁰F (-20⁰C to 60⁰C) while
discharging
<1 year: -4⁰F to 68⁰F (-20⁰C to 20⁰C)
<3 month: -4⁰F to 113⁰F (-20⁰C to 45⁰C)
<1 month: -4⁰F to 122⁰F (-20⁰C to 50⁰C)
Store the battery below 20⁰C,
RECOMMENDED:
low humidity, no dust and no corrosive gas
atmosphere. Store the battery with a state of
charge between 40-60%.
+, C, D, T, -
(LxWxH) 5.9in x 3.1in x 0.9in
0.95lbs
UL listed, UN 38.3 and CE
Not Protected Equipment, IPX0
(English)
Publicidad
