Rebel RB-1040 Manual Del Usuario página 26

Indicators
LED Color
1 glows green
2 glows yellow
Recommended current settings
Electrode diameter in mm
Note: The values given are indicative and may vary depending on the electrode used.
MAINTENANCE
Before cleaning and maintenance, always switch off the power tool and disconnect
it from power supply socket.
Clean the casing regularly with a soft cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Clean the machine with a brush or compressed
air. Remove very persistent dirt using a soft cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the
synthetic components.
Clean the power tool before storing. Store the power tool, user manual and accessories
in the original packaging. Store the product in a clean, dry place protected from moist and
keep it out of the reach of children. Do not store the power tool in temperatures below 0°C.
Do not place or store any object on the top of the power tool.
The product and the user manual are subject to change. Specifications can be changed
without further notice.
EN
the welding machine is
ready for operation
the welding machine
cannot work due to
exceeded temperature
1,6
2
2,5
3,2
Description
or voltage
Recommended current range in A
26
1
2
25 - 50
40 - 80
60 - 110
80 - 140