Publicidad
Idiomas disponibles
Idiomas disponibles
Keys:
No.
Key
Functionen
10
MODE
11
SET
12
DATA
13
ON <0>
3. Functions and programs
Function
Basic functions
Switching on
Switching off
Switch
ABS REL
Example:
at 10mm
Switch
REL ABS
Example:
at 10mm
-
Select measuring programs
-
Zero setting adjustment (+)
-
Adjustment of tolerance limits (+)
-
Choose MM / INCH
-
Choose scale interval
Start SETUP – Menu
-
-
Start OFFSET
-
Start tolerance limit adjustment
-
Start selection of the measuring unit
-
Start selection of the scale interval
-
Saving of the settings
-
Data transfer
-
Zero setting adjustment (-)
-
Adjustment of tolerance limits (-)
-
Key lock ON / OFF
-
Switch on
-
Switch off
-
Changing between absolute measure-
ment and relative measurement
(0-Preset)
Basic
Remarks
-
-
-
-
-
-
Action
Result
18
MIN / MAX / HOLD / TOL
Only in SETUP – Menu
(see detailed specification
"3. Functions and Programs")
(see detailed specification
"4. Handling of Functions and
Programs")
(see detailed specification
"4. Handling of Functions and
Programs")
(see detailed specification
"3. Functions and Programs")
Display only in REL
Remarks
The last mode will be shown
Note: The gauge switchs off auto-
matically if it is not used for longer
than 1 min.
Switch can be done in Mode MIN /
MAX / HOLD and TOL
Publicidad
