EGAmaster 57542 Manual De Instrucciones página 28

Precaution:
1. Communication function is only supported on some models. Check the model no. and its
specification before using communication function.
2. Do not insert the plug of communication cable into torque wrench that does not support com-
munication function.
Turn off power and then connect the accessory cable between the COM port of PC and
torque wrench.
1. Make sure the connection between PC and wrench is normal.
2. Press
3. Change the wrench operation mode to "Send". (Refer to "Peak Hold Mode Recorded Value
Review " section)
4. Use PC to start the uploader program.
5. In uploader program, first select the correct COM port No.
6. Next, select the file path to save the uploaded data.
7. Finally, press "upload" button to transmit the torque records to PC.
8. The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft
Excel to view *.csv file.
CAUTIONS:
The "Peak Hold" mode recorded value review also can be operated from "Track" mode
operation.
28
CONNECTING COMMUNICATION CABLE
UPLOADING RECORD DATA
together to reset the wrench.
COMMUNICATION