Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Weight Limit:
Bed: 450Lb/204Kg
Drawer: 40Lb/18Kg
KT - 2020/8/12
2014 Dorel Home Products All Rights Reserved
4573429N (Light Gray Velvet) 4389629N (Blue Linen)
4296429N (Dark Grey Linen) 4390329N (Ivory Linen)
Upholstered Bed with Storage Drawers
Thank you for purchasing from DHP!
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
4297929N (Green Linen)
Full Size
Lot Number
(TAKEN FROM CARTON)
B344296429N00-KT
1
Publicidad
Manuales relacionados para DHP 4573429N
Resumen de contenidos para DHP 4573429N
- Página 1 4573429N (Light Gray Velvet) 4389629N (Blue Linen) 4296429N (Dark Grey Linen) 4390329N (Ivory Linen) 4297929N (Green Linen) Upholstered Bed with Storage Drawers Full Size Weight Limit: Thank you for purchasing from DHP! Bed: 450Lb/204Kg Drawer: 40Lb/18Kg DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
- Página 2 Limited 1 year Warranty Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship Work in a spacious area and near where the unit will be used, preferably on a and agrees to remedy any such defect. This warranty covers one year from the carpet, or use a piece of the cardboard packaging to protect your floor and product.
- Página 3 PARTS...
- Página 4 Footboard Side Rail Side Rail Headboard Back Panel Center Rail Bracket Guide Support Rail Wooden Slats X 24 PART NUMBERS 4573429N 4390329N 4389629N 4297929N 4296429N PART IMPORTANT: (Light Gray Velvet) (Ivory Linen) (Blue Linen) (Green Linen) (Dark Grey Linen) LABELS...
- Página 5 Drawer Back Panel Drawer Side Panel Drawer Side Panel X 20 Front Panel Single Slat Cap Double Slat Cap X 24 X 12 PART NUMBERS 4573429N 4390329N 4389629N 4297929N 4296429N PART IMPORTANT: (Light Gray Velvet) (Ivory Linen) (Blue Linen) (Green Linen)
- Página 6 Hardware Pack Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. 4573429N (Light Gray Velvet) HP#:T4155429-00 4389629N (Blue Linen) 4296429N (Dark Grey Linen) The screw(s), bolt(s) to be used at each step are...
- Página 7 Step 1 Stick A1 to the back of A with Velcro as illustrated.
- Página 8 Step 2 Attach J x 2 to A and B with...
- Página 9 Step 3 Attach G X 2 to K with Fully tighten all bolts in this Step.
- Página 10 Step 4 Attach E and F to G with Don't completely tighten the bolts until STEP 6 is complete.
- Página 11 Step 5 Attach E and F to A and B with...
- Página 12 Step 6 6.1 Attach I x2 to A and B with 6.2 Attach I x2 to K with , then properly tighten all the bolts. The slat holes should be The slat holes should be oriented towards upside. oriented towards upside.
- Página 13 Step 7 7.1 Insert P into X , 7.2 Press X into E & F , repeat the same procedure for the opposite side of the bed with a new P and X . 7.3 Insert ends of both slats P into Y , then press Y into I as illustrated.
- Página 14 Step 8 Attach M to S and N with don't completely tighten the bolts until STEP 10 is complete. For better performance, please orient the plastic sheet towards inside of the drawer. Make sure that these holes are all located on the top side before assembling.
- Página 15 Step 9 9.1 Attach Q to L with 9.2 Attach Q X 4 and L to S and N with 9.3 Attach L to M with X 32...
- Página 16 Step 10 Attach sub-assembly L/S/N/M from previous step to C with , then properly tighten all the bolts. X 24...
- Página 17 Step 11 Attach to C.
- Página 18 Step 12 Align Drawers with the bed frame and push them into the bed. Slot Lock drawers by slightly lifting drawer and inserting the Pin into the Slot. Slot...
- Página 19 CAUTION: This unit is intended for use only with the products and/or maximum Helpful Hints weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Move your new furniture carefully, with two people lifting and carrying the unit to its new location.
- Página 20 Informaci n sobre la garant a Lea antes de comenzar a ensamblar DHP garantiza que este producto est libre de defectos de material y mano de Llame a nuestro n mero gratuito si necesita asistencia. obra y se compromete a remediar cualquier defecto de este tipo. Esta garant a Trabaje en un rea espaciosa y cerca de donde su producto ser utilizado, cubre 1 a o a partir de la fecha de compra original.
- Página 21 Tambi n confirme que ha recibido todos los componentes necesarios para el real en la esquina inferior derecha de cada p gina. ensamblaje al compararlos con la tabla de piezas indicadas en la secci n en ingl s. N MERO DE PIEZA 4573429N 4390329N 4389629N 4297929N 4296429N...
- Página 22 Instrucciones Limites de peso - Cama : 450Lb/204Kg Paso 1 Coloque A1 en la parte posterior de A con el cierre m gico como se ilustra. Limites de peso - Cama deslizable: 40Lb/18Kg Paso 2 Consejos tiles Una J X 2 con A y B con los Mueva sus muebles nuevos con cuidado, se requiere de dos personas para Paso 3 levantar y trasladar su mueble a su nueva ubicaci n.
- Página 23 Merci d'avoir achet un produit DHP ! Informations sur la garantie Avant de commencer l'assemblage DHP garantit que ce produit est exempt de tout vice de mat riaux et de fabrication Si vous avez besoin d'aide, appelez notre service la client le sans frais.
- Página 24 (illustrations disponibles dans la section en anglais). LISTE DES PI CES 4573429N 4390329N 4389629N 4297929N 4296429N TIQUETTE...
- Página 25 Instructions Limite de Poids - Lit : 450Lb/204Kg tape 1 Limite de Poids -Lit gigogne:40Lb/18Kg Coller A1 l'arri re de A avec le Velcro, comme illustr . tape 2 Conseils utiles Attacher J X 2 A et B avec D placez votre nouveau mobilier avec soin, nous recommandons deux tape 3 personnes pour soulever et transporter le mobilier vers son nouvel AttacherG X 2...