Description And Use; Identification; Guarantee - BOMBAS IDEAL CPH Serie Manual De Uso Y Mantenimiento

Bombas Ideal, S.A.

2.- DESCRIPTION AND USE

2.1.- Description
The booklet covers instructions for CP range of pumps.
These are horizontal split casing type pumps with suction and discharge nozzles and their supporting feet
integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection
and repairs by just removing upper half casing, and without disturbing alignment, pipe connection or
prime mover.
Pumps when properly installed and given due care in operation and maintenance should operate
satisfactorily for a long period.
When the pump is received, sometime before the actual use of pump, it should be inspected and located
in dry place. The coupling should be rotated periodical (once in a month) to prevent pitting of bearing
surfaces.
2.2.- Use
CP pumps are appropriate for lifting and moving liquids in industries, irrigation systems, mines, building,
urban supply, air conditioning installations, fire-fighting equipment, etc.
In their standard version they have been designed for moving clean water or slightly polluted liquids with
temperature up to 90º C.
Upon request, special configurations can be supplied for different liquids and temperatures up to 160º C.
Direction of Rotation: The standard direction of rotation is clockwise when viewed from driving
side. Pumps with reverse direction of rotation (anticlockwise) can be supplied on request.
Do not under any circumstances:

3.-IDENTIFICATION

CP pumps have a metal plate on the bearing support on which the following data is stated:
TYPE: identification of the pump model.
Nº : manufacturing number.
When a specific working point, flow & head, is specified in the contract or order, the following details will
appear on the plate :
Q (m 3 / h) : flow in cubic metres per hour.
H (m) : manometric head in metres.

4.- GUARANTEE

Pumps from Bombas Ideal S.A., have a guarantee period of 12 months from delivery date, against any
flaw in materials and manufacture, according to the general sales terms.
Failure to comply with the suggestions and recommendations in this manual, as well as any improper use
or non-authorised handling of the product, will completely invalidate the guarantee.
The guarantee excludes wear and tear through use, improper use, repair or replacement of the faulty part
by the user or by unqualified staff without the express consent of Bombas Ideal S.A.
•
Locate the systems in premises classified as involving an explosion risk.
•
Use these for moving inflammable liquids.
18