Publicidad
Idiomas disponibles
Idiomas disponibles
English
(3) Pull the nail feeder (B) back to engage the feeder knob
to the nail strip.
NOTE:
Quietly push the nail feeder (B) and feeder knob against
the nail.
If the nail feeder (B) and feeder knob are released from
backward the magazine and bumped against the nail, the
connecting paper of the nail can be damaged.
Use nail strip of more than 10 nails.
The Nailer is now ready to operate.
Removing the nails:
1 Pull the feeder knob backward.
2 Return the feeder knob forward quietly while pushing
the nail feeder (B).
3 Pull out nails from the back of the magazine.
2
Feeder knob
Nail feeder (B)
1
Feeder knob
Nail feeder (B)
Nails
3
NAILER OPERATION
Read section titled "SAFETY"(pages 4 – 9).
120°F MAX
(50°C)
— 16 —
DANGER
Operators and others in
work area MUST wear
safety glasses with side
shields which conforms
to ANSI Z87.1
specifications.
Never use in presence of
flammable liquids or
gases.
Do not touch around the
exhaust outlet with bare
hands.
The push lever and nose
will become hot and get
heated up after
prolonged or rapid use.
Explosion and fire hazard
Keep away from
sunshine and from
temperature exceeding
120°F (50°C).
Keep away from ignition
source.
No smoking.
WARNING
NEVER point tool at
yourself or others in
work area.
Keep fingers AWAY from
trigger when not driving
nails to avoid accidental
firing.
Use outside or well–
ventilated area.
Do not inhale its
contents.
Do not use the electrical
cord if damaged.
Have it repaired
immediately.
Never place your face,
hands or feet closer than
8 inches (200 mm) from
firing head when using.
Publicidad
