Chauvet Professional VIDCURVEKIT1 Guía De Referencia Rápida página 4

EN
Mounting
Before mounting with this product, read the
Mounting Diagram
Mounting Procedure
1. Install the VID-CURVEKIT on the panel as shown in
2. Insert the male bracket Speego locking bars into the female bracket Speego connections.
3. Twist the spring knob on the Speego by 90° until it locks into place.
4. Twist the tightening latch clockwise until the male bracket is secure to the female bracket.
5. To detach the VID-CURVEKITbrackets and separate the F-Series panels, reverse the previous steps.
Technical Specifications
Dimensions and Weight
Bracket
Top Male
Top Female
Bottom Male
Bottom Female
Note: Dimensions in inches are rounded.
Ordering
Product Name
VID-CURVEKIT
3
QUICK REFERENCE GUIDE
Safety
Length
5.71 in (144.95 mm)
5.71 in (144.95 mm)
5.71 in (144.95 mm)
5.71 in (144.95 mm)
Item Name
VIDCURVEKIT
Notes, as well as those for the attached products.
Installing on F-Series
Width
3.52 in (89.51 mm)
2.03 in (51.68 mm)
3.52 in (89.51 mm)
2.03 in (51.68 mm)
Item Code
23101610
Tightening
Latch
Spring
Knob
Panels.
Height
1.71 in (43.5 mm)
1.71 in (43.5 mm)
1.71 in (43.5 mm)
1.71 in (43.5 mm)
UPC Number
781462219581
VID-CURVEKIT QRG Rev. 2
Locking
Bar
Speego
Weight (Total)
3.2 lb (1.45 kg)