Teka CPX 15 Manual De Instrucciones página 30

EN
Installation instructions
Electrical Connection
The crockery warmer is equipped with a power
cable and plug for single phase current. We
advise that the plug is connected to a socket
that is easily accessible after installation.
If the crockery warmer is to be installed on a
permanent basis it should be installed by a
qualified technician. In such a case, the appliance
should be connected to a circuit with an all-pole
circuit breaker with a minimum separation of 3
mm between contacts.
28
The data necessary for the electrical connection
are described on the crockery warmer's
characteristics plate
compatible with those of the power outlet you are
going to use.
WARNING: THE CROCKERY WARMER MUST
BE CONNECTED TO EARTH.
The manufacturer and retailers do not accept
responsibility for any damage that may be
caused to people, animals or property if these
installation instructions are not observed.
and these must be