Pc Camera Hot-Key Buttons - Clevo M660SE Manual Del Usuario

PC Camera Hot-Key Buttons

You can use the PC Camera Hot-Key buttons
tion Quick Buttons" on page
out (if you have installed the Hot-Key and PC Camera drivers - see
on page 36).
1. Make sure the PC Camera is on (use the Fn + F10 key combination to power on the camera).
2. Press the application Hot-Key button once.
3. The BisonCap application will run.
4. Use the zoom Hot-Key buttons to obtain the picture required.
5. Press the application Hot-Key button for a second time (you will hear a camera motor sound to indicate the picture is
being taken).
6. The picture (in JPEG format) will be placed in the Snapshot folder on the desktop.
The Snapshot folder's default location is on the desktop. Do not move this folder
or an error may appear when you try to take a still picture using the application
Hot-Key button.
If you accidentally delete or move the folder, you can create a new Snapshot fold-
er on the desktop in order to capture the files.
(the quick button driver must not be installed - see
33) to run the BisonCap program, to take still pictures and to zoom the camera in and
Snapshot Folder
Figure 4 - Snapshot Folder
Concise User's Guide
"Hot-Key Buttons" on page 32
Hot-Key Buttons - 15
"Applica-
& "PC Camera"