Troubleshooting - Clevo M660SE Manual Del Usuario

Troubleshooting

Problem
The DVD regional codes
can no longer be
changed.
The Wireless LAN/
Bluetooth modules
cannot be detected.
The PC Camera module
cannot be detected.
The Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
The code has been changed the maximum 5 times. See
page 19.
The modules are off. Check the LED indicator
off (see "LED Indicators" on page
(WLAN) or Fn + F12 (Bluetooth) key combination(s) in order to enable the modules (see
Table 2, on page 13).
The module is off. Press the Fn + F10 key combination in order to enable the module (see
Table 2, on page 13). Run the BisonCap program to view the camera picture.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
Installation Procedure" on page
Possible Cause - Solution
"Changing DVD Regional Codes" on
to see if the WLAN/Bluetooth module is on or
11). If the LED indicator is off, then press the Fn + F11
32).
Concise User's Guide
"Driver
Troubleshooting - 37