Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
To remove the battery, press the battery release button and remove it.
To reposition the battery, slide it into its housing until it clicks into place.
Installing the wall mount
NOTE: Find a suitable location for the wall mount.
•
Preferably install the wall mount near an mains socket.
•
Only install the wall mount in a location where the ambient temperature is
constant and between +5 °C and 40 °C.
•
Place it in a clean, dry place, away from heaters and direct sunlight.
•
Make sure that the wall on which the wall mount will be secured is able to
support the weight of the unit and its accessories.
Place the wall mount on a wall. Make sure that the base of the wall mount is
approximately 122 cm above the floor so that the brush of the assembled stick
vacuum gently rests on the floor. Mark the drill holes for the screws with a pencil.
Then, drill the screw holes and insert the wall plugs. Place the wall mount on a wall.
Screw the mount to the wall.
DANGER! RISK OF ELECTRIC SHOCK!
•
Do not pierce the electric cables (or water pipes) located in the wall.
•
Do not install the wall mount on a metal wall.
Assembly/Disassembly
To assemble:
Align the tab and notch on the brush or crevice tool with the tube and push them
together until both parts are fully engaged. A click will be heard when the floor brush
is securely attached to the tube.
Push the tube into the handheld vacuum until it clicks into place.
OR
Push the brush or nozzle directly into the handheld vacuum, by making sure that the
tab and notch are correctly aligned.
•
Floor brush:
–
With bristles – Use it on all types of flooring, including hard and smooth surfaces, in
addition to carpets that require a deep clean.
19
EN
Publicidad
