Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
The suction power
is weak, there is
no suction or the
motor vibrates.
The operating time
is too short after
charging.
The brush is not
spinning.
The battery
indicators are
flashing rapidly,
and the vacuum
cleaner is hot.
Storage
• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and clean place, out of the reach
of children and pets.
• Please retain the packaging and use it to store your unit when
it is not in use for an extended period of time.
Possible Cause
• The nozzle is
blocked.
• The filter is blocked,
dirty or broken.
• It has not been
charged for enough
time.
• The battery is dead.
• The brush is
clogged with debris,
such as hair/fur.
• The brush or
compartment is
blocked, and/or the
battery or vacuum
cleaner motor has
overheated.
• The charger is not
compatible with the
vacuum cleaner.
23
Solution
• Remove the blockage.
• Clean the filter.
• If necessary, replace the filter with a
new one.
• Fully charge the battery as indicated
in the charging section.
• Ask a qualified technician to install a
new battery.
• Cut the tangled threads with scissors.
• Remove the brush and/or wheel axles
to clean them. Check that all the parts
spin smoothly when repositioned.
• Remove the brush to clean it. Empty the
dust cup. Let the vacuum cool down.
• When charging and using the unit,
make sure that the indoor temperature
is between 0 °C and 50 °C.
• Only use the charger supplied.
EN
Publicidad
